PRODUCT HIGHLIGHTS
- Aggressive Knurling with Center Knurl and Powerlifting Marks: Knurling on the eliteftsβ’ Power Bar is much more aggressive to help the lifter grip the bar during heavier attempts. Weβre pretty sure we went overboard on this! Compared an Olympic bar, the eliteftsβ’ Power Barβs knurling comes in more to accommodate a narrow grip if desired as well as center knurling for a more secure bar placement in squats, good mornings, or lunges.
Manufacturer: Category:Made in USA
Product Summary
- Aggressive Knurling with Center Knurl and Powerlifting Marks: Knurling on the eliteftsβ’ Power Bar is much more aggressive to help the lifter grip the bar during heavier attempts. Weβre pretty sure we went overboard on this! Compared an Olympic bar, the eliteftsβ’ Power Barβs knurling comes in more to accommodate a narrow grip if desired as well as center knurling for a more secure bar placement in squats, good mornings, or lunges.
- Bronze Bushing Bar: This is probably more than you want to know, but the barbell bearings fit between the bar and the sleeve and reduce the friction between the outer and inner sleeves, making the spinning movement smoother.
- 1-inch (2.85 cm) Diameter with 16.375-inch (41.5 cm) Sleeves: The diameter is pretty typical with the exception of our extreme knurling. Our sleeves, however, have an extended length for a greater load as well as placing the load set closer to the userβs hands. The closer the load sits to the userβs hand placement means the deflection of the bar will be less than a typical bar with less load area.
- 2,000 Pound (907 kg) Capacity with 190,000 PSI Strength: Donβt really need to lift 2,000 pounds/907 kilograms, but there you have it. PSI measures the tensile strength of the bar, which means the amount of force needed to permanently damage it. A bar with a low PSI will bend easily, and it will be no good after a few drops or one bad one. Our bar measures up, so donβt be THAT GUY! And yes, you know what we mean.
- Zinc Plating: Having high-quality zinc plating on our bar prevents it from rusting. It does not prevent scratches, dents, or nicks. If your bar does not have any scratches, dents, or nicks, you are not using it properly. Break it in and donβt be a cry baby!
Specs
| Bar Type |
Men’s Bars |
|---|---|
| Bar Use |
Powerlifting |
| Bar Weight |
20KG |
| Diameter |
28.5MM |
| Center Knurl |
Yes |
| Knurl Marks |
Powerlifting |
| Shaft Coating |
Bright Zinc |
| Bar Length |
86.5″ |
| Loadable Sleeve Length |
16.375″ |
| Sleeve Coating |
Bright Zinc |
| Bushing/Bearing |
Bushing |
| Tensile Strength |
190,000 PSI |
| Made In USA |
Yes |












Reviews
There are no reviews yet.